Monitor turning black after following LCD integration instructions
December 27, 2023, 12:12
I followed this instruction to setup my 3.5 LCD screen: https://www.instructables.com/Raspberry-Pi-4B3B-35-Inch-LCD-Touch-DisplayScreen-/
Then suddenly my monitor turns black screen and my LCD only shows white screen. I can't use my RPI since it has black and white screens that's why I can only use its memory card to fix it. What should I do, I already tried editing its config.txt but nothing works. Here is the content of its config.txt:
If you have the latest Raspberry Pi OS (Bookworm) that uses Wayland it will not work.
what can i do now
it is only black screen
By replying what OS you have installed ? And if your answer is Bookworm I will suggest that you switch to Bullseye. But first you need to answer.
And the second thing, DONT CROSS POST!
sorry sir for cross posting im a newbie
im using bookworm
it is working initially until i followed this https://www.instructables.com/Raspberry-Pi-4B3B-35-Inch-LCD-Touch-DisplayScreen-/
Bookworm Uses Wayland as Windows composer so I recommend that you switch to Bullseye
this code caused me problems:
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show
you can read https://discord.com/channels/818384379197784084/1189386838788542464 first
how can i switch
thank you
By imaging your SD card with Bullseye
is that the only choice, because there is a lot of configurations already done in the original OS
Well if you read the code in sudo ./LCD35-show and reverse what it has done
is that possible?
sorry im a newbie
we are working on a project, my friend gave it to me, then this happened
it is working initially then this happened
Perhaps.
And sometimes the hard school is to start over when you do something that you don't have full knowledge about.
I always read the install script before I implement it
is it possible to edit the config.txt to modify the hdmi settings?
<@796000224690307072>
it shows like this
are you familiar sir
<@796000224690307072>
If you examine the LCD35-show you can perhaps reverse the HDMI settings
I have a similar 3.5Inch display
the taskbar is missing
maybe i have incorrect hdmi configuration?
Yes, wrong resolution