pi5 not booting
March 2, 2024, 22:04
Currently I have an SD in with Kali for raspberry pi and raspberry pi OS installed on seperate SD cards.
Using a display with micro hdmi to hdmi, It just shows no signal on the monitor.
I get the same blinking pattern when there’s no as card and when I use both different SD cards that are flashed. One long flash followed by 2 short flashes on boot.
tried reformatting raspberry OS, when you select an os on the Imager instead of selecting raspberry pi os select "erase" using 64 bit.
I’m using a sandisk sd
Another thing to note: my fan isn’t turning on
You have 2 Long 1 Short = Partition not FAT
https://www.raspberrypi.com/documentation/computers/configuration.html#led-warning-flash-codes
It’s 1 long and 2 short not 2 long 1 short
I reflashed the SD card and made sure to erase it with the raspberry pi program
Only that there is no error code 1 Long 2 Short. But as long as it works now.
<@579575377886838814> does it work now?
It doesn’t work
The fan doesn’t even power on when I turn it on
uhh have u tried ssh
but the fan doesnt turn on
hm
Exactly
im thinking its an sd card issue
Are sandisks no good?
pretty sure theyre one of the best
lol
but do u have any spares or something
so u could just factor that out from the possibilities
I don’t have spare anything tbh. First pi
But aside from the board its self, the only parts I could swap out would be the fan and hdmi
I tried two different hdmi
And can’t swap out the fan
alr then try ssh
just in case