PI 4 Model B taking around 5 mins to boot

Hi Guys, I’m new to the raspberry pi community. I recently bought an Pi 4 B. I have booted it with Pi OS Desktop via pi imager in my 64 gb Sandisk Class 10 sdxc card. It took me more than 5 mins for every boot. I thought it was an issue while buring so I have burned it another time using etcher tool. Still same issue so I have tried the lite version even the lite version took 4 mins of booting time. I didn’t know what was the issue here. In the logs I can see one failure but I’m not sure that was the issue. Take a look at the failed log below

The first boot takes a couple (1-10) of minutes. If the next boot also takes a long time then you need to trouble shoot.

The next boot also taking 5 mins

And when I boot with pendrive it took only 20 seconds

Then check the SD card for faults.

Will check the faults do you know any ways to find it

It depends on your what OS you have.

And a search engine can do the trick.

Warning: Only 63968 of 63969 MByte tested. The media is likely to be defective. 27.2 GByte OK (57231924 sectors) 35.1 GByte DATA LOST (73774540 sectors) Details:69.5 KByte overwritten (139 sectors) 0 KByte slightly changed (< 8 bit/sector, 0 sectors) 35.1 GByte corrupted (73774401 sectors) 69.5 KByte aliased memory (139 sectors) First error at offset: 0x0000000052810e00 Expected: 0x0000000052810e00 Found: 0x00000052810e0000 H2testw version 1.3 Writing speed: 4.16 MByte/s Reading speed: 8.32 MByte/s H2testw v1.4

Got this error in sd card tester

Can we solve this?

I have bought a new memory card the issue was in the memory card!

It’s working fine now boots up with in 30 seconds

> 35.1 GByte corrupted (73774401 sectors) Wow, that card was in really, really bad shape

56% corrupted sectors